1500W 35a E-Bike Motor Controller
1500W 35a E-Bike Motor Controller
Suits 36V, 48V and 52V
Regular price
$79.99
Regular price
$0.00
Sale price
$79.99
Unit price
per
Typically, you will receive your order within one week unless otherwise specified at the top of the description*. We are a local store ready to assist you with any questions.
View full detailsPACKAGE INCLUDES
- 1 x DC Electric Bicycle Motor Controller (for SW900 LCD) - speed controller
KEY FEATURES
- Voltage: DC 36/48V (suits 52V as well)
- Current: 35+/-1A
- Pedal Assistance Power (PAS)/Speed Control
- Compatible to be used with SW900 display
- Suitable for both throttle and PAS when paired with SW900 display
- Swap between two power modes 250W or 1500W
- Pure Sinewave controller
- Dual Mode (i.e. works and reverts to square wave in case your hall sensor inside your motor is damaged)
SPECIFICATIONS
- Mass: 550g
- Geometry: 180mm x 82mm x 40mm
CONNECTORS - DESCRIPTION
ID |
Wire Colour |
Description |
Connect to |
1 |
Blue / Green / Yellow (thick) |
Phase Wires MT60 |
Motor |
2 |
Red/black 2 No. |
Brake cut-off |
E-Brakes |
3 |
Red/black (thick) |
Battery Anderson Plug neg. (black) pos. (red) |
Battery |
4 |
Blue |
Road Legal switch |
To each other |
5 |
Red/black/yellow/green/blue |
Hall sensor |
Motor |
6 |
Red/black/green |
Throttle |
Throttle |
7 |
Red/white/black |
PAS |
PAS sensor |
8 |
Red/blue/black/green/yellow |
Display |
SW900 LCD |
9 |
Red/black |
LED light |
LED light |
NOTE
- This controller requires a 36V or 48V battery (Lithium-ion recommended) with a minimum continuous output of 35 amperage. Please kindly check your battery and battery BMS specifications for suitability.
- The controller can be swapped between the full 1500W or 250W power mode by connecting the single blue wire(s) together. Please check your local guidelines and keep the road legal switch (blue wires) connected on public roads.
- Please feel free to contact us before purchasing this controller to check the compatibility to your electric bike if unsure.
- The phase wire and battery connectors may differ from those shown in the photo. Please contact us if bespoke connections are required, as this may incur a minor additional cost.